Robust water leak detector with detection cable
The Floodline MultiZone control panel from Andel is designed for organisations that require absolute reliability when monitoring water, oil and gas leaks. The wall‑mounted panel is available in 4‑, 8‑ and 16‑zone versions, allowing a single system to monitor multiple areas simultaneously without losing clarity. The technology behind the system is built for continuous operation, providing a stable and dependable overview of all connected detection zones day and night. This makes it a solution appreciated by both installers and end users: easy to operate, yet powerful enough for professional environments.
Each zone can be configured with a single sensor or a complete network of water, oil or gas sensors. Long distances are no issue, as the system supports detection cables and remote sensors up to 1500 metres. This allows large buildings or extensive technical installations to be monitored from one central panel. In addition to leak detection, the system can also measure humidity and temperature per zone, offering valuable insight into room conditions and enabling early identification of potential issues. This makes the Floodline MultiZone panel suitable for technical rooms, industrial facilities, data centres, server rooms and commercial buildings.
A key advantage of the system is that all zones operate completely independently. Each zone is displayed separately on the panel, ensuring that alarms are immediately visible and easy to locate. When one zone triggers an alarm, the remaining zones continue to operate normally. This is essential in environments where multiple areas must be monitored simultaneously and continuous operation is critical. The system records both simultaneous and sequential alarms accurately, allowing faults or leaks to be analysed afterwards.
Applications
- Pipework (under and over insulation)
- Drip trays and containment areas
- Cooling systems and air‑conditioning units
- Server rooms and data centres
- Roof edges, ceilings and technical shafts
- Heat pump installations
- Industrial production environments
Detection Cable Specifications
- Warranty: 10 years
- Material: 9‑core, HSLSF insulation, polyester inner layer, nylon outer jacket
- Response time: Immediate reaction upon detection
- Diameter: 5 mm
- Length: Various lengths available; custom lengths on request
Water Leak Detector Specifications
- Alarm: Internal LED and audible alarm per zone
- Relays: 4 outputs, volt‑free contacts
- Outputs:
- Leak in any zone (general) – DPCO relay (5A @ 230VAC)
- System fault in any zone (general) – SPCO relay (5A @ 230VAC)
- Complete module power failure – SPCO relay (5A @ 230VAC)
- Leak in an individual zone – SPCO relay (1A @ 30VDC)
- Inputs: One sensor input per zone, up to 1500 m
- Supply voltage: 110/230VAC, 50/60Hz, 25W, internal 12VDC supply and battery backup
- Relay switching capacity: See outputs
- Dimensions: 292 × 285 × 90 mm
- Warranty: 10 years
- Mounting: Wall‑mounted
- Material: Steel, powder‑coated, RAL 7043
- Monitoring: Continuous water, gas and oil detection with zone‑specific alerts
- Fault detection: Sensor or power cable damage, errors or disconnections
- Status indicators: Battery and mains power, internal 12VDC supply, low battery, alarm status
Note: Some products in our webshop require basic knowledge of electrical engineering.