Wed, 12 Aug 2026 07:01:34 +0000 <![CDATA[Nieuwste producten van Watermelder-expert]]> https://www.watermelderexpert.com/ <![CDATA[Spoel 230V - IP66]]> Wed, 15 Jul 2026 08:58:53 +0000 <![CDATA[Waterdetectionsystem ]]> Robust water leak detector with detection cable
The Floodline MultiZone control panel from Andel is designed for organisations that require absolute reliability when monitoring water, oil and gas leaks. The wall‑mounted panel is available in 4‑, 8‑ and 16‑zone versions, allowing a single system to monitor multiple areas simultaneously without losing clarity. The technology behind the system is built for continuous operation, providing a stable and dependable overview of all connected detection zones day and night. This makes it a solution appreciated by both installers and end users: easy to operate, yet powerful enough for professional environments.

Each zone can be configured with a single sensor or a complete network of water, oil or gas sensors. Long distances are no issue, as the system supports detection cables and remote sensors up to 1500 metres. This allows large buildings or extensive technical installations to be monitored from one central panel. In addition to leak detection, the system can also measure humidity and temperature per zone, offering valuable insight into room conditions and enabling early identification of potential issues. This makes the Floodline MultiZone panel suitable for technical rooms, industrial facilities, data centres, server rooms and commercial buildings.

A key advantage of the system is that all zones operate completely independently. Each zone is displayed separately on the panel, ensuring that alarms are immediately visible and easy to locate. When one zone triggers an alarm, the remaining zones continue to operate normally. This is essential in environments where multiple areas must be monitored simultaneously and continuous operation is critical. The system records both simultaneous and sequential alarms accurately, allowing faults or leaks to be analysed afterwards.

Applications

  • Pipework (under and over insulation)
  • Drip trays and containment areas
  • Cooling systems and air‑conditioning units
  • Server rooms and data centres
  • Roof edges, ceilings and technical shafts
  • Heat pump installations
  • Industrial production environments

Detection Cable Specifications

  • Warranty: 10 years
  • Material: 9‑core, HSLSF insulation, polyester inner layer, nylon outer jacket
  • Response time: Immediate reaction upon detection
  • Diameter: 5 mm
  • Length: Various lengths available; custom lengths on request

Water Leak Detector Specifications

  • Alarm: Internal LED and audible alarm per zone
  • Relays: 4 outputs, volt‑free contacts
  • Outputs:
  • Leak in any zone (general) – DPCO relay (5A @ 230VAC)
  • System fault in any zone (general) – SPCO relay (5A @ 230VAC)
  • Complete module power failure – SPCO relay (5A @ 230VAC)
  • Leak in an individual zone – SPCO relay (1A @ 30VDC)
  • Inputs: One sensor input per zone, up to 1500 m
  • Supply voltage: 110/230VAC, 50/60Hz, 25W, internal 12VDC supply and battery backup
  • Relay switching capacity: See outputs
  • Dimensions: 292 × 285 × 90 mm
  • Warranty: 10 years
  • Mounting: Wall‑mounted
  • Material: Steel, powder‑coated, RAL 7043
  • Monitoring: Continuous water, gas and oil detection with zone‑specific alerts
  • Fault detection: Sensor or power cable damage, errors or disconnections
  • Status indicators: Battery and mains power, internal 12VDC supply, low battery, alarm status

Note: Some products in our webshop require basic knowledge of electrical engineering.

]]> Thu, 19 Feb 2026 14:15:23 +0000 <![CDATA[Leak detection system with water detector and sensing cable]]> Protect your equipment, rooms, or other applications from water damage with a fully equipped leak detection system. These high‑quality products are designed to quickly detect leaks. The system consists of a line‑type detection cable that detects water exactly where you need it. When water is detected by this sensing cable, a signal is sent to the water detector. This water detector then alerts you to the presence of a water leak and indicates where the leak is located.
 

Product Application

This water detector is ideal for use in:

  • Server and patch cabinets
  • Basements and technical rooms
  • Under boilers, pumps, or heating systems
  • Storage areas with moisture-sensitive goods
  • Commercial buildings and installations

Specifications Water Detector

  • Notification: LED indicator and alarm

  • Relay contacts: Optional NO/NC

  • Voltage: 12–24 VDC

  • Switching capacity: 2A at 30V DC, 1A at 125V AC

Specifications Detection Cable

  • Cable material: Polyethylene

  • Resistance: 13.00 ohm per meter

  • Length: See options

  • Cable color: Yellow

  • Weight: 39 g per meter

  • Diameter: 6 mm

  • Temperature resistance: Up to 85°C

  • Certification: CE

    Please note: Some products in our webshop require basic knowledge of electrical engineering.

]]> Fri, 13 Feb 2026 13:08:19 +0000 <![CDATA[MD-LC1B-6 Water leak detection cable ]]> Product description Sensor cable MD-LC1B-6 consists of 2 sensor wires. When water is touched with the sensor cable, the module immediately triggers an alarm.
The advantages of the convector include:
  • 19 copper wires.
  • The resistance is less than 30Ω
  • Environmentally friendly synthetic material
  • A soft and flexible cable

Applications

This product is used in various heating applications including:
  • Data centers
  • Factories
  • Workplaces
  • Department stores
  • Air conditioning systems
  • Pipelines

Functions

The sensor cable has several interesting functions. The spiral structure provides a solid structure for detection, while using the principle of liquid iris absorption, trace water can be efficiently absorbed.

Specifications

  • Type: line detection-conduction
  • Design: flexible cord TPE
  • Sensor length: optional (sold per 1mtr)
  • Diameter: approx. 6mm
  • Conductors: 2 x 0.5mm²
  • Resistance: 30 Ohm
  • Material: copper, TPE
  • Ambient temperature: max. 70 degrees
  • Drying time: 15 seconds after water/moisture is gone
  • Weight: approx. 20gr per m
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.
 ]]> Fri, 16 May 2025 13:56:48 +0000 <![CDATA[Socket siren (+ 230V plug)]]> Product description The compact alarm siren works on any 230 V socket, with or without a grounding device. It produces a loud alarm signal (screech) and is equipped with a flashing light. This siren has no switch: you can turn off the alarm by pulling it out of the socket.

Applications

Application: indoors only. Control by a water detector or temperature switch with 230 Volt output: see Related Products (bottom of page). The socket siren can also be used in a smart plug (of home automation system) or as a personal push button alarm in combination with a wireless socket.

Specifications

  • Power supply: 230 Volt
  • Current consumption: 200 mA
  • Operating range: -20...+50 °C
  • Acoustic alarm: 90 dB
  • Operating buttons: no
  • Indication: LED flashing light
  • Dimensions: Ø 78, H 55 mm
  • Security class: IP20
  • Manual: English
  • Weight: 70 g
  • Connection: 2-wire connection cable +/-25cm + 230V connection plug (cable can be extended up to 50 meters)
]]> Thu, 04 Jul 2024 07:47:04 +0000 <![CDATA[Mobeye CombiGuard ShipGuard CM4600]]> Product Description The Mobeye CombiGuard keeps an eye on the environment, with sensors and connection options. Minimizes risks. In an alarm situation the owner receives notifications via push message, telephone call, text message or e-mail. For optimal control and monitoring, the Mobeye CM4600 is able to combine various sensors and signals. This makes it a reliable help to monitor risks and limit damage. 

Features
- Alarm via app, call, text message and email
- An effective water detection
- A compact temperature monitoring system
- Low battery voltage notification
- (Shore) power failure monitoring (when connected to external power)
- Two AN/NO/NC alarm inputs
- Online programming and insight in Mobeye Internet Portal

Applications

The sensor is factory calibrated and gives the value accurate to decimal places. The Mobeye Combiguard also contains a leakage sensor. This sensor is very sensitive and detects water-based liquids. When the two pins sense water an alarm follows immediately.
The shipguard is suitable for a wide variety of applications. From boats to transformer houses and from ICT server rooms to storage locations.
If you are looking for an alarm specifically for boats, our CM-4300FS is an interesting alternative.

Specifications

  • Contents: CM4600, 1x temperature sensor (1m) , 1x water leak sensor (1m), 1x power adapter, 2x CR123 batteries
  • Operation: On and off via button, time schedules and SMS.
  • Inputs: 2X AN/NO/NC (analog or potential-free) 1x temperature, 1x water, 1x12-24V DC (+/-2V)
  • Output: Open collector (at external voltage) , max 200mA
  • Power supply: 2xCR123 lithium batteries/ 12-24V DC (regulated) + 2x CR123 lithium.
  • Battery life: 1 year with normal use (battery powered) and/or 3 years with normal use (externally powered)
  • Dimensions: 94 x 94 x 28 mm
Tip: Avoid surprises and be well prepared with our spare sensor and our 4G communication detector mains power supply.

Added value sim/portal
As a sim card we advise to activate the included Mobeye sim card. With this the device communicates via 4G LTE-M as well as 2G and ís “multi-provider”. It chooses the strongest network on site, has a very good penetrability and thus gives a reliable connection. With the Mobeye SIM card the device is also connected to the Mobeye Portal and the Mobeye Messages app. This gives extra security and user-friendliness. The dashboard shows the status of one or more devices at a glance. Programming is done online, incoming test messages are automatically checked, in case of problems contacts are warned via app, call, SMS and/or e-mail. Forwarding to a monitoring center (PAC) is also possible. The SIM card costs € 4/month* excluding VAT (flat fee for normal use), (annual) payment is online, or -on request- on invoice. Deployable throughout Europe. *Note: prices may vary. See link below for current prices.

An own simcard is also possible (NL: KPN or Vodafone, no t-Mobile or subsidiaries). The device then works (only) via 2G and the Mobeye Portal functions are no longer required. At alarm it will call and/or sms (to max. 5 numbers). Please note that a prepaid card expires if the card is not used for too long.

Click on the following link to view the SIM card cost of the standard SIM card supplied from the manufacturer: https://www.mobeye.com/sim-portal [mobeye.com]

Demo portal all models
Using the information below you can log in to a demo portal for all models. Here you can choose the model of your choice and see what you can set up, view and track and review.

Demo Portal:
URL: mymobeye.com
Username: guest
Password: mobeye
Tip: Set the screen via the globe globe at the top right to “English”.

Click on the following link to view the SIM card cost of the standard SIM card included from the manufacturer: https://www.mobeye.com/sim-portal [mobeye.com]
 ]]> Thu, 27 Jun 2024 10:10:27 +0000 <![CDATA[CM guard TwinLog]]> Product description The Mobeye CM-Guard TwinLog is a voltage monitor, ideally used as a battery guard for monitoring batteries and accumulators. In an alarm situation it sends notifications via push message, telephone call, SMS or e-mail. In addition, it logs analog values and sends them to the online portal for display as graph, meter and table.

Features:
- Alarm via app, call, text message and email
- Alarms when analog values are too low or too high
- Complete voltage view in graph
- Power failure monitoring (if connected to external voltage)
- Two AN/NO/NC alarm inputs
- Siren
- Complete device insight when connected to Mobeye Internet Portal

If you are still looking for an analogue sensor our 4G communication detector is the ideal accessory to add to your installation.

Applications

From deep discharge, a battery usually fails. By setting an alarm limit, the 
contacts timely notification to take action. The CML4055 has an (open collector) output that can be used to switch a battery or device.
The TwinLog can operate for long periods on its internal batteries and thus independent of an external power source. If external power is available, it is advisable to connect it. The power supply is then directly monitored as well. And if it fails, a notification follows.

Specific situations in which the Twinlog CM Guard is commonly used are as follows:
- Battery monitoring
- Battery monitoring 
- Analog sensors.

If you need an alarm sensor that operates on an external voltage and is capable of continuous measurement of the sensor(s), our CML4015-HP is an alternative option.

Specifications

  • Contents: CML4055, 2XCR123 batteries, sim card
  • Operation: On and off via button, time schedules and SMS
  • Inputs: 2x inputs, configurable as analog/potential-free (NO/NC)
  • Voltage ratings: 0-48V with peak voltage up to 64V
  • Output: open collector (at external voltage), max 200mA
  • Power supply: 2xCR123 lithium batteries/ 12-24V DC (regulated) + 2x CR123 lithium
  • Battery life:
  • Under normal use: more than 1 year (when battery powered) / more than 3 years (externally powered)
  • Dimensions: 94 x 94 x 28 mm
  • Connectivity:
     - 4G LTE-M + 2G EGSM Quad band
     - 2G EGSM Quad band (900/1800 MHz)

See the following link to view the SIM card cost of the standard SIM card included from the manufacturer: https://www.mobeye.com/sim-portal [mobeye.com]

Tip: Our outdoor cabinet is the ideal accessory for this application. The exterior is waterproof with a protection rating of IP65 and is ideally capable of protecting the heating system from various weather conditions.
Added value sim/portal
As a sim card we advise to activate the included Mobeye sim card. With this the device communicates via 4G LTE-M as well as 2G and ís “multi-provider”. It chooses the strongest network on site, has a very good penetrability and thus gives a reliable connection. With the Mobeye SIM card the device is also connected to the Mobeye Portal and the Mobeye Messages app. This gives extra security and user-friendliness. The dashboard shows the status of one or more devices at a glance. Programming is done online, incoming test messages are automatically checked, in case of problems contacts are warned via app, call, SMS and/or e-mail. Forwarding to a monitoring center (PAC) is also possible. The SIM card costs € 4/month* excluding VAT (flat fee for normal use), (annual) payment is online, or -on request- on invoice. Deployable throughout Europe. *Note: prices may vary. See link below for current prices.

An own simcard is also possible (NL: KPN or Vodafone, no t-Mobile or subsidiaries). The device then works (only) via 2G and the Mobeye Portal functions are no longer required. At alarm it will call and/or sms (to max. 5 numbers). Please note that a prepaid card expires if the card is not used for too long.
Click on the following link to view the SIM card cost of the standard SIM card supplied from the manufacturer: https://www.mobeye.com/sim-portal [mobeye.com]
Demo portal all models
Using the information below you can log in to a demo portal for all models. Here you can choose the model of your choice and see what you can set up, view and track and review.

Demo Portal:
URL: mymobeye.com
Username: guest
Password: mobeye
Tip: Set the screen via the globe globe at the top right to “English”.

*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.

]]> Thu, 27 Jun 2024 09:53:17 +0000 <![CDATA[Sistm LP 4G communication detector]]> Product description Read out, alarm and log sensor values with the Mobeye SISTM LP.
The Mobeye SISTM measures the values of almost every industrial sensor. The inputs of the SISTM read the output values and convert them to meaningful parameters. If (min./max.) limit values are set and they are exceeded, the contacts receive an alarm message. Periodically, sensor values are logged and displayed in an online portal.

Features:
- For reading universal sensors.
- Alarm via app, call, SMS and email.
- Two alarm inputs for reading out two sensors
- Battery powered

Because the Mobeye System LP is completely battery powered, it is also important that it is monitored properly. For this we have the Twinlog CM guard; a battery guard that accurately observes the analogue values.

Applications

The CML4015-LP is fully battery powered and self-contained, providing power to both the SISTM and the sensors. The CML4015-LP measures sensor values periodically, with an adjustable interval and warm-up time of the sensors. The measured values are logged. If the alarm limit is under or exceeded, an alarm notification follows.

Operation:
1.    Select the appropriate sensor and place it simultaneously with the Mobeye SISTM.
2.    Configure the warm-up time, calibration value, log frequency alarm limits and the other settings. Also designate contacts for alarms.
3.    If alarm limits are exceeded and or undershot, an alarm notification is immediately sent to the specified contacts.

Do you prefer module that uses external power for the SISTM and sensors? See the 2-channel module CML4015-HP here.

Specifications

  • Contents: CML4015-LP, incl sim card.
  • Operation: On and off via button, time schedules and SMS.
  • Inputs: 2x analog input
  • Output: Open collector (with external voltage), max 200 mA. Switches on alarm or after incoming SMS/call.
  • Power supply: 6-12V (7.2V battery pack available as accessory)
  • Sensor power supply: 5V / 15V.
  • Battery life: Up to 10 years depending on use
  • Dimensions: 130 x 85 x 60 mm
  • IP rating: IP66
  • Connectivity: 4G LTE-M + 2G EGSM Quad band. 
Tip: If you are looking for a water detector that is also suitable for other liquids, we definitely recommend 4G communication detector with float.

Added value sim/portal
As a sim card we advise to activate the included Mobeye sim card. With this the device communicates via 4G LTE-M as well as 2G and ís “multi-provider”. It chooses the strongest network on site, has a very good penetrability and thus gives a reliable connection. With the Mobeye SIM card the device is also connected to the Mobeye Portal and the Mobeye Messages app. This gives extra security and user-friendliness. The dashboard shows the status of one or more devices at a glance. Programming is done online, incoming test messages are automatically checked, in case of problems contacts are warned via app, call, SMS and/or e-mail. Forwarding to a monitoring center (PAC) is also possible. The SIM card costs € 4/month* excluding VAT (flat fee for normal use), (annual) payment is online, or -on request- on invoice. Deployable throughout Europe. *Note: prices may vary. See link below for current prices.

An own simcard is also possible (NL: KPN or Vodafone, no t-Mobile or subsidiaries). The device then works (only) via 2G and the Mobeye Portal functions are no longer required. At alarm it will call and/or sms (to max. 5 numbers). Please note that a prepaid card expires if the card is not used for too long.
Click on the following link to view the SIM card cost of the standard SIM card supplied from the manufacturer: https://www.mobeye.com/sim-portal [mobeye.com]

Demo portal all models
Using the information below you can log in to a demo portal for all models. Here you can choose the model of your choice and see what you can set up, view and track and review.

Demo Portal:
URL: mymobeye.com
Username: guest
Password: mobeye
Tip: Set the screen via the globe globe at the top right to “English”.

See the following link to view the SIM card cost of the standard SIM card included from the manufacturer: https://www.mobeye.com/sim-portal [mobeye.com]

*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.

]]> Thu, 27 Jun 2024 09:43:53 +0000 <![CDATA[Mobeye Sistm HP 4G communication detector]]> Product description The Mobeye SISTM is a 2-channel module, suitable for all sensors with an output value between 0 and (maximum) 10 volts, or 4-20mA. By setting the measuring range, conversion factor and calibration value, the values are readable as understandable values.
The Mobeye SISTM measures the values of almost every industrial sensor. As soon as (min./max.) limit values are set and exceeded, the specified contacts receive an alarm notification. Periodically the sensor values are logged and displayed in an online portal.

Features:
  • Autonomous and reliable for reading universal sensors.
  • Alarm via app, call , text message and email.
  • Two alarm inputs through which two sensors run
  • External power supply

Applications

Depending on the version, the CML4015 and sensors operate entirely on batteries, or on a 12-24VDC power source.
The CML4015-HP uses external power for the SISTM and the sensors. With continuous measurement on the sensors, if the set limit is under or exceeded, an alarm is initiated. Logging of values is done according to an adjustable interval. The power supply is also monitored. If it is lost, an alarm notification follows. Externally powered; SISTM and sensors and operate on a 12-24V DC power source or via a mains adapter.
Do you prefer a module that is fully battery powered and provides power for both the SISTM and sensors? See here the 2-channel module CML4015-LP .

Operation:
Select a suitable sensor and place it together with the Mobeye SISTM.

Set the warm-up time, calibration value, log frequency, alarm limits, and other settings and choose contacts for notifications.

If alarm limits are under or exceeded, the SISTM sends alarm messages to the contacts. Logged values are viewable online in table and graph form.
When it comes to the specific application areas of the Mobeye Sistm HP, they are as follows;
  • Vacuum measurement
  • Pressure measurement
  • Conduction of water
  • Soil moisture

Specifications

  • Contents: CML4015-HP incl sim card
  • Operation: On and off via button, time schedules and SMS
  • Inputs: 2x analog input
  • Output: open collector (max 200 mA) , schekalt at alarm or after incoming call/sms.
  • Power supply: 12-24 DC (regulated) +2x CR123 lithium
  • Battery life: More than 3 years (with normal use)
  • Dimensions: 130 x 85 x 35 mm
  • IP rating: IP66
  • Connectivity: 4G LTE-M + 2G EGSM Quad band
Tip: A battery monitor is essential for monitoring analog limits and provides visibility into the voltage drift.
Added value sim/portal
As a sim card we advise to activate the included Mobeye sim card. With this the device communicates via 4G LTE-M as well as 2G and ís “multi-provider”. It chooses the strongest network on site, has a very good penetrability and thus gives a reliable connection. With the Mobeye SIM card the device is also connected to the Mobeye Portal and the Mobeye Messages app. This gives extra security and user-friendliness. The dashboard shows the status of one or more devices at a glance. Programming is done online, incoming test messages are automatically checked, in case of problems contacts are warned via app, call, SMS and/or e-mail. Forwarding to a monitoring center (PAC) is also possible. The SIM card costs € 4/month* excluding VAT (flat fee for normal use), (annual) payment is online, or -on request- on invoice. Deployable throughout Europe. *Note: prices may vary. See link below for current prices.

An own simcard is also possible (NL: KPN or Vodafone, no t-Mobile or subsidiaries). The device then works (only) via 2G and the Mobeye Portal functions are no longer required. At alarm it will call and/or sms (to max. 5 numbers). Please note that a prepaid card expires if the card is not used for too long.
Click on the following link to view the SIM card cost of the standard SIM card supplied from the manufacturer: https://www.mobeye.com/sim-portal [mobeye.com]
Demo portal all models
Using the information below you can log in to a demo portal for all models. Here you can choose the model of your choice and see what you can set up, view and track and review.

Demo Portal:
URL: mymobeye.com
Username: guest
Password: mobeye
Tip: Set the screen via the globe globe at the top right to “English”.

See the following link to view the SIM card cost of the standard SIM card included from the manufacturer: https://www.mobeye.com/sim-portal [mobeye.com]

*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.

]]> Thu, 27 Jun 2024 09:28:22 +0000 <![CDATA[H tronic water protection switch WSS1 | Solenoid valve]]> Product description
The WSS 1 water protection switch discovers leaks, alerts the user acoustically and visually and switches off the power and water supply.

Applications

Possible areas of application are:

- Detecting defects in washing machines, dishwashers or hot water boilers.
- Flood alarm.
- Additional protection for water level or float switch.

SCOPE OF DELIVERY
- Water protection switch WSS 1
- WSS 1V solenoid valve
- Water sensor

Specifications

  • Ambient temperature: 0 ... +50 °C
  • Relative humidity: < 80
  • WSS 1 dimensions: 98 x 60 x 41 mm
  • WSS 1V dimensions: 84 x 54 x 40 mm
  • Water sensor dimensions: 75 x 30 x 8 mm
  • Weight WSS 1/WSS 1V/water sensor: 157/315/56 g
  • Operating voltage: 230 V AC
  • Power consumption: approx. 5.0 W
  • Standby power consumption: approx. 0.5 W
  • Switching power (ohmic load): max. 3680 W
  • Trip sensitivity: ≈ 100 kOhm
  • Protection class: IP20
  • Water sensor connection: 3.5 mm
  • Solenoid valve connection: 2.5 mm
  • Alarm volume: approx. 80 dB
  • Water connection: G3/4
  • Cable length all cables (power, sensor, solenoid valve): approx. 2 m
​​​​​​*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.]]> Mon, 29 Apr 2024 10:25:03 +0000 <![CDATA[Water alarm with Wi-Fi notification | RAT-60]]> Product description

Water alarm switches ON or OFF & telephone notification

This socket water alarm can (according to your choice) switch on or off a device as soon as its sensor detects water. After water detection, you will also receive a notification on your mobile phone. Simply choose the desired switching function with a button on the side of the water alarm.

Universal socket water alarm Wi-Fi

•    Switch mains power on or off.
•    Alarm with adjustable volume.
•    Leakage notification on smartphone via Tuya app. 
•    Reset button and indicator lights

Applications

Control/protect 230V devices

SWITCH ON: in case of water leakage, a 230V pump is automatically energised. It is also possible to activate a 230V strobe light or alarm horn in case of alarm. As soon as the sensor detects water, mains voltage is applied to the output and the green LED lights up.
SHUT OFF: Use this function mode for a washing machine or an electric boiler. Also suitable for kitchen appliances, such as coffee machines. When you plug it in, the mains voltage is automatically cut if there is water on the floor. The alarm will then beep and the green LED will go out.

Indicator lights and alarm tone

When a water alarm is triggered, the red LED flashes and a sharp alarm tone sounds. The loudness is adjustable in 3 steps. This audible alarm only stops after you press the Reset button.

Notification via an app

After the sensor detects water, the device will send a push notification to a mobile phone via the Wi-Fi network so that action can be taken immediately. 

Placement in the wall socket

You place the water alarm IN-UIT between a wall socket and the power cord of the device to be switched. If the green LED lights up, this means that mains voltage is being transmitted. This water alarm is equipped with protective earth.

Water sensor with 2 m cable

The water sensor is permanently connected to the alarm unit with a flexible 2-metre cable. You place the sensor on the floor (leakage) or the place (level) where you want to detect water.
Delivery includes a plug with screw for fixing the sensor. This may be done horizontally or vertically. With a knife or other metal object on the contacts of the sensor, you can easily check whether the water alarm switches correctly.

Specifications

  • Power supply: 230 V (mains voltage)
  • Power consumption: 0.4 W
  • Switching capacity: 1,800 W
  • Operating range: +4...+50 °C
  • Application: Tuya
  • Acoustic alarm: 85 dB/3 m
  • Sound: adjustable in 3 steps
  • Indicator lights: 3x LED
  • Dimensions: 106x55x35 mm
  • Weight: 225 grams
  • Reset button: yes
  • Water sensor: 2 m cable
  • Sensor: horizontal/ vertical, with mounting hole
  • Manual: NL, Ger, Eng, Fr
  • Safety class: IP20
  • Manufacturer: German
  • Hallmark: CE

Click for water leakage alarms.
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.

]]> Wed, 17 Jan 2024 15:02:08 +0000 <![CDATA[Heat Trace Sealant (RTV 1.5 OZ/200+ Sealant, 40ml) R]]> Product description Heat Trace sealant is used to seal, block or seal gaps between building materials to prevent liquids, air and pests from entering. This sealant can also be used to fill cracks in surfaces such as concrete, fiberglass and other hard building materials.

Applications

For best use:
  1. Ensure surfaces are clean and grease-free.
  2. Full performance properties develop over a period of 24 hours.
  3. The hardening process starts as soon as the product is exposed to the environment.
  4. The pieces to be assembled should be coupled within minutes of applying the adhesive.
  5. Excess material can be easily wiped away with the appropriate solvents.
  6. Optimal storage: Store the product in an unopened container in a well-ventilated area of between 8-21 °C. Temperatures lower than 8 °C or temperatures above 28 °C may adversely affect product properties.

Specifications

  • Content: 40 ml / 42 g
  • Water and heat resistant
  • Little odor
  • Working temperature: -60 degrees to +250 degrees
  • Non corrosive

*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.

]]> Mon, 18 Dec 2023 15:30:26 +0000 <![CDATA[Water sensor Home | IBIS]]> Product description The Water Sensor 'Home' has a voltage-free NO+NC alarm contact. Can be connected directly to a home automation system, GSM detector, water detector or other alarm system with potential-free input. Download the datasheet for installation instructions.

Applications

Build your own alarm system

This water sensor is intended for fixed wiring. This means you need to install wiring. Advantage: works more reliably than a wireless water alarm. It is possible to link the alarm contacts, so you can connect up to 8 of these water sensors (in 2 groups) to one GSM alarm detector.

Very compact, can be placed anywhere

Compact water sensor, with water detector, electronics and switching contacts in one housing. Operates on safe low voltage of 12 or 24 volts: choose the appropriate option when ordering. Note: only suitable for direct voltage (DC). Universal water alarm with de-energized make and break contact for alarm inputs. Note: the alarm contact cannot control sirens, lights or other alarm generators!

Waterproof housing

Features: high sensitivity and fast response in case of leakage. The floor sensor is encased in a hermetically sealed housing, with 2 metal detector pins at the bottom. This water sensor is resistant to permanent submersion, due to flooding.

Specifications

  • Type: active water sensor/detector
  • Principle: point detection-conduction
  • Voltage: 12Vdc or 24 Vdc
  • NO-NC contact: de-energized
  • Contact load: max. 500 mA
  • Idle consumption: < 0.3 W
  • Alarm consumption: 0.5 W
  • Sensor: 2 detection contacts
  • Detection height: > 2.5 mm
  • Indicator lights: none
  • Sensor block material: metal
  • Housing height: 30 mm
  • Diameter (bottom): 48 mm
  • Total weight: 160
  • Connection cable: approx. 1 m
  • Humidity: 20...100 RH
  • Operating range: -0...+50 °C
  • Safety class: IP68
  • Manual: Dutch
  • Hallmark: CE
  • Connections Water sensor 'Home
The 5-wire connecting cable can be extended with normal telephone or data cable.

Red = + supply voltage
Black = - supply voltage
Green = NC contact
Yellow = common
Blue = NO contact

Note: At rest there is contact between yellow and green, while at alarm yellow and blue are internally jumpered.

*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.

]]> Fri, 19 Jun 2020 10:08:07 +0000 <![CDATA[4G communication detector with float switch CM4300FS]]> Product description

The Mobeye WaterGuard-FS is a reliable water detector for reporting changes in water levels. Alarm notifications are via push message, telephone call, text message or e-mail

Applications

  • Tank
  • Water basin
  • Dirty and clean water
  • Bilge water
  • Swimming pool
With the float sensor the Mobeye WaterGuard-FS monitors the water level in a tank, basin or water tank. To monitor a second water level connect a second Float Sensor. Operates on battery power or external voltage. If external power is lost, it also sends a power failure notification.

Operation

Float detects water level
This 4G communication detector transmits via the GSM network when the water level is too high or too low. The float transmits a NO/NC signal to the corresponding 4G communication detector.
For extra reliability or a second measuring point, a float can also be connected to the other signal input!

Alarm in case of mains voltage failure
The 4G communication detector operates for more than one year on a set of batteries and automatically sends an SMS when they are low.
When using mains power (mains adapter option), it also reports “power failure. Loss of mains power is often indicative of an approaching problem, for example, pump failure.
If this fails, a notification follows. The internal batteries ensure that the alarm detector continues to work for a long time. The WaterGuard-FS continues to monitor the float sensor and second input contact and will still transmit alarm messages. When power is restored, a signal also follows.

Text alert to 5 phone numbers
The 4G communication detector sends an SMS and/or call. You can set as many as 5 different phone numbers for this purpose, so that an alarm is almost always noticed.

Once someone has confirmed the alarm call, the remaining numbers are no longer called. You can set the call sequence yourself.

4G communication detector with intelligent functions
This compact universal alarm detector has various options, such as choice of SMS and/or call, automatic switch-on and switch-off times, free alarm texts per input, alarm delays, test messages, etc.

Specifications

  • Inputs: 2x NO/NC
  • Batteries: 2x CR123 (included)
  • Option: adapter for 230 Volt
  • Sensor: float switch (1x)
  • Cable length float: 1.5 m
  • Float: long 55 mm, Ø 13 mm
  • Status indication: LED light
  • Number recognition: yes
  • Material: plastic, black
  • Temperature: -10...+50 °C
  • Module dimensions: 94 x 94 x 28 mm
  • Manual: Dutch
  • Weight: 80 g
  • Hallmark: CE

Option: power adapter + cable


Compact mains adapter, fits into socket with or without protective earth. The GSM 4G communication detector also gives an alarm when the mains voltage fails!
Complete with connection cable; the red wire is + and the - is black. Equipped with coax plug for quick connection and disconnection.
  • Mains adapter: fits into wall socket
  • Connection voltage: 100...240 volts
  • Power consumption: 5.4 watts
  • Output: 12 Volt DC voltage
  • Maximum current: 450 mA
  • Short-time current: < 500 mA
  • Dimensions: 66 x 39 x 24 mm
  • Indicator light: LED, red
  • Mains plug: without earth
  • Mains cable: approx. 1.3 m
  • Connection cable: 2 m
  • Hallmark: CE
Click on the following link to view the sim card cost of the standard sim card included from the manufacturer: https://www.mobeye.com/sim-portal [mobeye.com]

Added value sim/portal
As a sim card, we recommend activating the included Mobeye sim card. With this the device communicates via both 4G LTE-M and 2G and ís “multi-provider”. It chooses the strongest network on site, has a very good penetrability and thus gives a reliable connection. With the Mobeye SIM card the device is also connected to the Mobeye Portal and the Mobeye Messages app. This gives extra security and user-friendliness. The dashboard shows the status of one or more devices at a glance. Programming is done online, incoming test messages are automatically checked, in case of problems contacts are warned by app, call, SMS and/or e-mail. Forwarding to a monitoring center (PAC) is also possible. The SIM card costs € 4/month* excluding VAT (flat fee for normal use), (annual) payment is online, or -on request- on invoice. Deployable throughout Europe. *Note: prices may vary. See link below for current prices.

An own SIM card is also possible (NL: KPN or Vodafone, no t-Mobile or subsidiaries). The device then works (only) via 2G and the Mobeye Portal functions are no longer available. At alarm it will call and/or sms (to max. 5 numbers). Please note that a prepaid card expires if the card is not used for too long.
Click on the following link to view the SIM card cost of the standard SIM card supplied from the manufacturer: https://www.mobeye.com/sim-portal [mobeye.com]

Demo portal all models
Using the details below you can log in to a demo portal for all models. Here you can choose the model of your choice and see what you can set up, view and track and review.
Demo Portal:
URL: mymobeye.com
Username: guest
Password: mobeye
Tip: set the screen via the globe at the top right to “Dutch”.

*Please note: when purchasing some products on our webshop, a basic knowledge of electrical engineering is required (for installation).
 ]]> Fri, 19 Jun 2020 10:08:05 +0000 <![CDATA[Outdoor cabinet IP65]]> Product description Universal plastic enclosure for wall mounting. Waterproof version with transparent front door. Pre-punched gland holes on all four sides.

Applications

M3 = mounting width 54 mm (3 mod)
M6 = mounting width 108 mm (6 mod)
M8 = mounting width 144 mm (8 mod)
M12 = built-in width 180 mm (12 mod)

Specifications

  • Type: Schneider Kaedra
  • Mounting: 35 mm DIN rail
  • Material: plastic
  • Color: grey RAL 7035
  • Safety class: IP65
  • Temperature: -25...60 °C
  • Quality mark: CE

*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.

]]> Fri, 19 Jun 2020 10:08:04 +0000